眦角移位Z形成形矫正术

2016-03-14 佚名 www.windrug.com

眦角移位Z形成形矫正术 [适应证] 远内眦畸形,内眦角明显向颞下方移位者。 [术中注意事项] 同前。 [手术步骤] 1.内眦部上下睑缘外5mm处,平行睑缘作皮肤切口,切口长度按眦角移位程度决定,一般长约1.0~1.5cm。上下眼睑皮肤切口于内眦角汇合。按内眦距离等于1/2瞳孔距离的原则,标出正常内眦位置。于正常内眦位置的鼻侧5mm向上睑皮肤切口的颞侧端作另一皮肤切口,使内眦部切口呈Z形

眦角移位Z形成形矫正术

[适应证]

远内眦畸形,内眦角明显向颞下方移位者。

[术中注意事项]

同前。

[手术步骤]

1.内眦部上下睑缘外5mm处,平行睑缘作皮肤切口,切口长度按眦角移位程度决定,一般长约1.0~1.5cm。上下眼睑皮肤切口于内眦角汇合。按内眦距离等于1/2瞳孔距离的原则,标出正常内眦位置。于正常内眦位置的鼻侧5mm向上睑皮肤切口的颞侧端作另一皮肤切口,使内眦部切口呈Z形(图1)。

图1

2.用钝头剪分离深层组织,尽量寻找原因眦韧带断端,但多数患者的韧带残端与四周的结缔组织混在一起不易区分。切除瘢痕组织,松解所有的牵拉力量,使之充分松动。将颞侧内眦韧带断端缝于前泪嵴附近的骨膜上(图2)。

图2

3.将两个三角形皮瓣交错转位后。

分层缝合眼轮匝肌和皮肤(图3)。

图3

[术中注意事项]

手术过程中注意清除瘢痕组织,松解四周粘连牵拉力量,使之充分松动,否则必将影响手术矫正效果。

[术后处理]

同前。

评论区 (2)
#插入话题
  1. [GetPortalCommentsPageByObjectIdResponse(id=92699, encodeId=3e63926994a, content=太专业了, beContent=null, objectType=article, channel=null, level=null, likeNumber=68, replyNumber=0, topicName=null, topicId=null, topicList=[], attachment=null, authenticateStatus=null, createdAvatar=/v1.0.0/img/user_icon.png, createdBy=a37a1710612, createdName=oo902, createdTime=Mon Jul 11 07:59:00 CST 2016, time=2016-07-11, status=1, ipAttribution=), GetPortalCommentsPageByObjectIdResponse(id=1800788, encodeId=b5551800e8817, content=<a href='/topic/show?id=e839e3179f6' target=_blank style='color:#2F92EE;'>#矫正术#</a>, beContent=null, objectType=article, channel=null, level=null, likeNumber=69, replyNumber=0, topicName=null, topicId=null, topicList=[TopicDto(id=73179, encryptionId=e839e3179f6, topicName=矫正术)], attachment=null, authenticateStatus=null, createdAvatar=, createdBy=18fc139, createdName=一闲, createdTime=Sun Jul 10 21:36:00 CST 2016, time=2016-07-10, status=1, ipAttribution=)]
    2016-07-11 oo902

    太专业了

    0

  2. [GetPortalCommentsPageByObjectIdResponse(id=92699, encodeId=3e63926994a, content=太专业了, beContent=null, objectType=article, channel=null, level=null, likeNumber=68, replyNumber=0, topicName=null, topicId=null, topicList=[], attachment=null, authenticateStatus=null, createdAvatar=/v1.0.0/img/user_icon.png, createdBy=a37a1710612, createdName=oo902, createdTime=Mon Jul 11 07:59:00 CST 2016, time=2016-07-11, status=1, ipAttribution=), GetPortalCommentsPageByObjectIdResponse(id=1800788, encodeId=b5551800e8817, content=<a href='/topic/show?id=e839e3179f6' target=_blank style='color:#2F92EE;'>#矫正术#</a>, beContent=null, objectType=article, channel=null, level=null, likeNumber=69, replyNumber=0, topicName=null, topicId=null, topicList=[TopicDto(id=73179, encryptionId=e839e3179f6, topicName=矫正术)], attachment=null, authenticateStatus=null, createdAvatar=, createdBy=18fc139, createdName=一闲, createdTime=Sun Jul 10 21:36:00 CST 2016, time=2016-07-10, status=1, ipAttribution=)]
    2016-07-10 一闲